Natto
1. Prepare 200g of dried soybeans, you can also order according to your own situation!
2. Soak the prepared soybeans overnight, and remember to change the water twice when the soybeans are soaked!
3. The next day, steam the soaked soybeans in a pot for about 1 hour. (Some people use pressure cookers. I don’t like pressure cookers. I don’t think it is safe. So I use ordinary steamers at home to steam soybeans.) Mix 3g of bacteria powder prepared in advance with a small amount of water. When the good soybeans are placed at a temperature of about 50 degrees, pour the water containing the bacteria powder into the soybeans and stir well.
4. Put the soybeans containing the bacterial powder into the yogurt machine. I used a small bowl to hold the soybeans. Outside the small bowl is the tank of the yogurt machine. I put a small amount of water in the tank. Cover the yogurt maker with cling film and pierce about 60 small holes in the cling film. Use the "yogurt" function, about 16 hours
5. When the time is up, take out the soybeans from the yogurt machine. At this time, I saw that the soybeans seemed to be covered with frost.
6. This is the drawing effect of soybeans after being taken out from the yogurt machine.
7. Cover the soybeans with plastic wrap and store them in the refrigerator for about 10 hours!
8. This is the drawing effect after taking it out of the refrigerator!
9. Compared with the wire drawing effect during the first fermentation, the contrast is a bit obvious~
Tips: 1. In the process of making natto, the chopsticks and spoons I use are sterile, water-free and oil-free.
2. A small amount of bacteria powder can make a lot of beans without putting a lot of bacteria powder.