Pineapple Soda Soda

Pineapple Soda Soda

1. Install the CO2 cylinder into the air inlet bomb compartment, and press to close the door.

2. Fill the bottle with pure water, and be careful not to exceed the scale mark, otherwise splashes will appear.

3. Put the bubble nozzle tube into the bottle and tighten it clockwise.

4. Hold the machine and turn the co2 release button for a moment, and the rotary knob at the bottom can adjust the bubble size.

5. In just 10 seconds, all the CO2 in the gas bomb is injected into the water bottle.

6. In order for the gas to fully blend into the water, the water bottle needs to be shaken for a few seconds.

7. Press the vent button until the gas is released, and turn it counterclockwise to remove the gas cylinder and open the lid for drinking.

8. Cut the pineapple into small pieces.

9. Use Kqueen to pour out the juice into the sunflower juice machine.

10. Pour out the juice.

11. Pour in the prepared soda water and stir evenly.