by Wanshanhong
Difficulty
Easy
Time
10m
Serving
2
1. This is the espresso machine of Dongling used today. The stainless steel on the surface of the machine is reflective, and the film is not as good as the real thing.
2. The dark roasted coffee beans used can also be medium roasted, which are suitable for this coffee machine
3. Use a grinder to grind the coffee beans into powder. Don’t grind too finely, too fine coffee will come out slowly, and not too coarse, otherwise the extraction will be insufficient
4. This is a three-in-one functional handle of the machine, which can be used for coffee powder, pouches and coffee capsules. There is also a measuring spoon, the other end of the measuring spoon is used to flatten the coffee powder
5. I use coffee powder to make a large cup, so I use that big filter, take a spoon and a half of coffee powder into the filter
6. Flatten and compact the other end of the measuring spoon
7. Compaction is more conducive to extraction
8. Put it in the handle, if there is coffee powder sprinkled around, wipe it off
9. Install the handle on the coffee machine according to the instructions
10. Behind the coffee machine is a water tank. The water tank has a large capacity of 1.5 liters. Add pure water and pay attention to the upper and lower limits. It is not suitable to add pure water, and the machine should not be scaled
11. There is a very intimate cup warmer above the coffee machine, open the lid
12. Put the cup on the cup warmer to heat and keep warm
13. Turn on the power, the indicator light of the power is on, and the machine starts to warm up
14. When the preheating is completed, the green indicator light is on, and the coffee can be extracted with boiling water
15. Put the coffee cup down and turn the function switch to the coffee position
16. The coffee comes out. A spoon and a half of coffee powder can make about 45 ml of espresso
17. Pour the boiled pure milk into the espresso
18. Then take out the refrigerated pure milk to make milk foam. I put the cup in the refrigerator and refrigerate it. If the milk temperature is high, the milk frothing effect will be poor
19. Turn on the steam function of the machine, first let the steam a little, then insert it into the milk cup, insert about 2 cm deep, and make milk froth. The best temperature of the milk froth is around 65 degrees, and the brewed coffee tastes the best, so I used a thermometer to measure the temperature of the milk froth
20. Wipe the steam pipe clean with a damp cloth immediately after the milk froth is made
21. The volume of the whipped milk foam will increase by about twice, so the cup should pay attention to the capacity.
22. Pour the whipped milk froth into the coffee cup to make a latte that is easy to make and delicious. It will be done in a while. Although the steps in this recipe seem to be many, most of them introduce the use of the machine. The time to actually make coffee is very short and simple
23. The quick and delicious latte is ready, and enjoy it while it is hot. With a piece of avocado scones, the delicious afternoon tea will start.
24. I would like to thank Gourmet World and Dongling Electric!
Tips:The whipped milk froth was left a little unused in the end. Although there is a certain ratio between milk and espresso, latte is not static. You can adjust it according to your taste.









