Barbie Cake Base
1. Salad oil is mixed with milk,
2. Stir the emulsified state "It is a relatively thick state."
3. (Preparation: Separate egg yolk and egg white) Pour into the egg yolk and stir evenly.
4. Sift in the medium powder.
5. Continue to stir into a smooth egg yolk paste.
6. Add white sand sugar to the egg whites at one time and beat them to a small angle.
7. Take one third and mix into the egg yolk paste.
8. Stir the egg yolk paste evenly, you can stir it left and right, right and left, up and down, and it will be even, not easy to mix too much, so as to avoid tendons.
9. Pour the egg yolk paste into the egg white,
10. Stir it evenly with the J-shape mixing method,
11. The mixed batter is in the shape of a streamer, and poured into the cake mold of the 7-inch Barbie doll three-dimensional princess dress in rose gold.
12. The oven is preheated, 155 on the heat and 165 on the heat. I am a Dongling 38-liter oven, and the temperature will be a little higher. Therefore, it is normal to choose a degree lower than a normal oven. (The temperature has to be adjusted appropriately according to the temperature difference of your own oven)
13. I put the bottom layer on the bottom, I chose 80 minutes, and finally baked it for 60 minutes and it was out of the oven, because the heating tube on the top of the oven was quickly topped and the toothpick was inserted into the cake and it was not wet. 60 minutes has proved enough.
14. After the oven is out, you must remember to release the mold with your bare hands after the cool down.
15. Finished picture
Tips: The temperature still needs to be adjusted appropriately according to your own oven, because the mold is relatively high, please adjust the position of the mold appropriately to avoid being too close to the upper tube, and accidents of scorching during the expansion process. The organic stone mill powder of Xinliangjia is used here, and the effect and taste are also good!