Caramel Pudding
1. Beat the eggs in a bowl
2. Pour the granulated sugar into the milk and stir well to melt the sugar
3. Put it in the microwave and stir for one minute to speed up the melting of the sugar
4. Pour the egg liquid into the milk, add vanilla extract (2, 3 drops will do)
5. Filter 2-3 times (this step is very important, sift out the small bubbles in the pudding liquid to make the pudding smooth and tender)
6. Then let stand for 20 minutes
7. Let’s make caramel, add fine sugar to the water
8. Heat over medium heat
9. The sugar water is boiling and continue to boil over medium heat. (Be careful not to stir during the cooking process. When boiling the caramel, avoid crystallization. If there are sugar particles attached to the pot wall, you can use a brush to dip the top of the pot wall with water**, the water runs along the pot wall Flow down to rinse the sugar granules into the pot.)
10. After the water has evaporated and dried, the temperature of the syrup will rise and start to coke
11. When the syrup is cooked to a light amber color, turn off the heat immediately, add hot water and shake well.
12. Pour the boiled caramel into the mold while it is hot, and place a layer on the bottom. (The caramel will harden after cooling, so it must be operated while it is hot. The silicone cake mold I use, if it is a pudding mold, butter around the mold for demoulding)
13. Mould into deep baking pan, pour pudding liquid
14. Fill the bakeware with hot water, at least half the height of the pudding liquid.
15. Then put the bakeware into the preheated oven, middle level, lower the heat to 170 degrees, and heat to 160 degrees, and bake for about 35-45 minutes
16. Until the pudding liquid solidifies. The baked pudding tastes better if it is refrigerated for 2 hours. When eating, it can be released by tapping the mold.
Tips: 1. The pudding liquid must be sieved.
2. The temperature of the oven is for reference only. The time and temperature are related to the size of the pudding mold and the depth of the pudding liquid.
3. The steaming method must be used, that is, hot water is poured into the bakeware. The height of the water must be at least half the height of the pudding liquid. Otherwise, the baked pudding will have honeycomb holes and completely lose its tenderness.