Papaya Coconut Milk Jelly——in The Hot Summer, Bring this Icy Delicacy to The Table
1.
The upper material, 2g fish gelatin powder is completely soaked with 5g milk
2.
Pour the remaining milk and coconut milk into the egg-beater bowl, boil off on a low heat
3.
Add the soaked isinglass powder, 10g of sugar, and use a manual whisk to stir until the isinglass powder, the sugar is completely melted
4.
Pour the stirred mixture into 1/3 of the pudding bottle and keep it in the refrigerator until set
5.
Middle layer material, 3g fish gelatin powder is completely soaked in 5g milk
6.
Add 20g of papaya milk to the food processor and whipped into papaya puree
7.
Bring the remaining milk to a boil over low heat
8.
Pour in the papaya puree
9.
20g granulated sugar, soaked fish gelatin powder, mix the ingredients evenly
10.
After mixing, pour into 2/3 of the previous pudding bottle, and continue to put it in the refrigerator for refrigeration
11.
The bottom material, 2g fish gelatin powder is completely soaked in 5g milk
12.
Bring the whipped cream and the rest of the milk to a boil over low heat
13.
Add the soaked isinglass powder, 10g of granulated sugar, stir until the granulated sugar, the isinglass powder is melted
14.
Pour into the previously refrigerated pudding bottle and continue refrigerating until completely set
15.
The fully solidified papaya coconut milk jelly is ready. Finally, cut the remaining papaya into small pieces, put them in a pudding bottle, and decorate and enjoy...
Tips:
Precautions:
1. The method in the recipe is relatively simple, and the power is great if it is made step by step in the recipe.
2. There is a step to boil in the recipe. When the other materials are mixed well after the heat is removed, the mixture should be poured into the pudding bottle after the mixture has cooled down, and then poured into the pudding bottle when the mixture is cooled to almost no temperature. refrigeration. As the mixture cools down, use a manual whisk from time to time to stir the mixture to avoid premature coagulation of the isinglass powder mixture.
3. Because this is refrigerated layer by layer, you must wait until the upper layer is completely solidified before making the next layer of material to prevent the upper layer from solidifying at room temperature.
4. Papaya can be replaced as you like. Such as strawberries, mangoes, etc...