Pan Omelet
1. Beat the eggs into a clean water-free basin, add salt and fine sugar.
2. Cut the butter, then melt the butter with insulated water, take it out and cool it down for later use. Prepare other materials.
3. Use a manual whisk to beat the eggs, sugar and salt evenly. Beat for a while until the caster sugar is completely melted. Then add corn oil and melted butter. The butter cannot be too hot.
4. Continue to mix well, then sift the low flour into it.
5. Use a manual whisk to beat evenly and smoothly, without particles.
6. Add a little black sesame seeds. Feel free to stir evenly. The paste is a slightly sticky paste that drips smoothly.
7. At this time, you can prepare a pan, the Melaleuca pan I used. Pour in a little batter.
8. Cover with a piece of clean greased paper, and use a pressure plate (this is used to make snow flakes, you can use a flat tool instead) to thin the batter as much as possible. It must be thin.
9. The induction cooker has a minimum firepower of 300, and heat it on a small fire until the batter is solidified, then the oil paper can be gently peeled off. Before uncovering, you can press the paste again to make it as thin as possible.
10. After the surface is basically solidified, you can use a silicone spatula to shovel it up and turn it over, and slowly fry until the water in the batter evaporates. It can be seen that water vapor will evaporate. It is best to fry until both sides are browned, and the finished product will be crisp. Otherwise, the finished product will have a soft texture.
11. Basically the two sides are browned. Clamp the edge of one side with chopsticks and roll it to the right. Be careful not to burn your hands.
12. Roll to the bottom, you can press and fry for a while to set the shape, you can turn off the heat, take out the chopsticks, and clamp the egg roll to the plate to cool it down. When continuing to the next operation, cool down the pan, and then pour the batter, otherwise the batter will be set quickly and there will be no way to thin it.
Tips: 1. The batter must be thinned and fried patiently until the water has evaporated. If the finished product is not crispy, it can be baked in the oven for a while to continue to evaporate water.
2. Fry on low heat until both sides are browned to be crispy.
3. Pay attention when rolling, you can adjust the time of subsequent egg roll frying according to the situation of the first egg roll.